DM/V480-2T1-PCI-HiZ

Dialogic
Dialogic Logo

Dialogic DM/V480-2T1-PCI-HiZ 48-Port DM3 Series Digital Media Board, Voice

Details

Name Value
Product DM/V480-2T1-PCI-HiZ
Make Dialogic
Base PCI 746
Type Media Boards
Lead Time Request Quote for Lead Time
Quantity in Stock Request Quote for Quantity in Stock

Specs

No specs listed...

Features

No features listed...

Datasheet

application/pdf

Filename:

Dialogic-DM3-HiZ-PCI-Board-datasheet-4005589471.pdf

Size:

122 KiB

Extracted Text

Dialogic®
DM3 HiZ Boards
Quick Install Card for PCI

„ DM/V480-2T1-PCI-HiZ
„ DM/V600-2E1-PCI-HiZ

Part number
64-0028-02
Copyright © 2001-2007
Dialogic Corporation.
All Rights Reserved.
Before You Begin

Protecting the Board from Damage

CAUTION
All computer boards are sensitive to electrostatic
discharge (“ESD”). Handle all static sensitive boards
and components, boards and computers at a static-
safe work area and observe anti-static precautions at
all times.

If you are not familiar with ESD safety precautions, visit
http://www.dialogic.com/support/hwinstall to learn more.

Unpacking the Board
Unpack the Dialogic® DM3 HiZ Board (“board”)
according to the following steps:

1. Prepare a static-safeguarded work area.
2. Carefully remove the board from the shipping
carton and anti-static packaging. Handle the
board by the edges and avoid touching the
board’s components.
3. Lay the board on the static-dissipative work
surface.

Note: Place boards in static-shielding bags when carrying
boards from station to station.

CAUTION: Do not remove the board from the anti-static
packaging until you are ready to install it. Observe proper
anti-static precautions at all times.


Configuring the Hardware
Board Identification
The DM3 device driver, part of the Dialogic® System
Software, assigns board instance numbers in ascending
order (beginning with 0) as it detects each board in your
system. A board instance number is the identification (ID)
number used by the system software to recognize the
board.
NOTE: If you add a board to the system, the existing
board instance (ID) numbers may change, depending upon
the PCI bus and slot number where the new board is
installed.
Windows System
After the Dialogic® hardware and the Dialogic System
Software are installed, refer to the Dialogic® Configuration
Manager (DCM) utility to retrieve the board instance (ID)
number(s) assigned to the board(s) in your system.
See the DCM online help for more details about board
identification.
LINUX System
In a LINUX system, you must set SW1 to a unique
number for each DM3 board in your system so that the
Power On Self Test (POST) for the board(s) can complete
successfully. Use a non-magnetic screwdriver to turn SW1
to 1 of 16 board settings, 0-9 or A-F.
After the Dialogic hardware and Dialogic System
Software are installed, refer to the proper configuration
files to retrieve the board instance (ID) number(s) assigned
to the board(s) in your system. See the Dialogic Software
Installation Reference for your operating system for more
information about LINUX configuration files.
® ®

Installing the Hardware

NOTE: Dialogic recommends that you install Dialogic®
hardware before Dialogic® software. However, if you are
adding DM3 hardware to an existing DM3 system, you do
not need to uninstall existing DM3 software.
9. Use the CT Bus cable to connect the board(s) you are
installing to other boards in the system.
5. Using the slot’s board guides, insert the board’s edge
connector into the bus slot. Press firmly until the
board is securely seated in the slot.

6. Replace and tighten the slot’s retaining screw to
secure the board firmly in the chassis (if applicable).

1. With your computer on the static-safe work area,
switch off the power and disconnect all power cords
from the electrical outlets.
3. Select an empty PCI expansion bus slot and remove
the slot’s retaining screw and access cover plate (if
applicable).
7. Connect external digital telephone cables to the
RJ-48C jacks on the board bracket. See Connecting
External Cables section.
Installing a PCI Board
16-Bit
ISA Slot
32-Bit
PCI Slot
PCI
Board
Computer
Chassis
Remove
Cover
Plate
4. If you are not installing your board in an ISA form
factor PCI slot, remove the ISA edge retainer from
the board.
8. Select a new PCI slot and repeat steps 3-7 for each
board you are installing.
2. Remove the chassis cover plate.
Physical Description
1. RJ-48C jacks: Connectors to external digital
telephone network interface. See Connecting
External Cables section.
2. General Network Interface Alarm LED
3. Power LED
4. Reset LED
5. SW1: Rotary switch to set board identification
(UNIX systems only).
6. POST LEDs: Indicate Power On Self Test
(POST) status during power up.
Alarm LEDs: Indicate network alarms for trunk
1 (CH1 and CH2) and trunk 2 (CH3 and CH4).
• Red: Alarm to indicate loss of signal.
• Yellow: Alarm to indicate loss of frame
synchronization at far end of external
network.
• Green: Indicates signal present; powered
up and receiving signal from external
sources.
• Loopback: Indicates loopback mode is
activated.
7. CT/MVIP Bus Termination Jumpers: Bus
signal is terminated when the corresponding
jumper clip is installed. Signal must be
terminated only on boards at each end of the
CT Bus cable.
JP2A: CT Bus termination jumper
JP2B: MVIP Bus termination jumper
8. P3: CT Bus connector
9. ISA Edge Retainer
1
5 10
9
8
2

3 4
1
2
3
4
6
7
Red
Yellow
Green
Loopback
CH4 CH3 CH2 CH1
JP2B
JP2A
10. Signal Processing Daughterboard
It is possible that the use or implementation of any one of the concepts,
applications, or ideas described in this document, in marketing collateral
produced by or on web pages maintained by Dialogic may infringe one or
more patents or other intellectual property rights owned by third parties.
Dialogic does not provide any intellectual property licenses with the sale of
Dialogic products other than a license to use such product in accordance
with intellectual property owned or validly licensed by Dialogic and no
such licenses are provided except pursuant to a signed agreement with
Dialogic. More detailed information about such intellectual property is
available from Dialogic’s legal department at 9800 Cavendish Blvd., 5th
Floor, Montreal, Quebec, Canada H4M 2V9. Dialogic encourages all
users of its products to procure all necessary intellectual property
licenses required to implement any concepts or applications and does
not condone or encourage any intellectual property infringement and
disclaims any responsibility related thereto. These intellectual property
licenses may differ from country to country and it is the responsibility
of those who develop the concepts or applications to be aware of and
comply with different national license requirements.
Dialogic, Diva, Eicon, Eicon Networks, Eiconcard, Dialogic Pro and
SIPcontrol, among others, are either registered trademarks or trademarks of
Dialogic. Dialogic's trademarks may be used publicly only with permission
from Dialogic. Such permission may only be granted by Dialogic’s legal
department at 9800 Cavendish Blvd., 5th Floor, Montreal, Quebec, Canada
H4M 2V9. Any authorized use of Dialogic's trademarks will be subject to
full respect of the trademark guidelines published by Dialogic from time to
time and any use of Dialogic’s trademarks requires proper
acknowledgement. The names of actual companies and products
mentioned herein are the trademarks of their respective owners.
All contents of this document are furnished for informational use only and
are subject to change without notice and do not represent a commitment on
the part of Dialogic Corporation or its subsidiaries (“Dialogic”).
Reasonable effort is made to ensure the accuracy of the information
contained in the document. However, Dialogic does not warrant the
accuracy of this information and cannot accept responsibility for errors,
inaccuracies or omissions that may be contained in this document.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN
CONNECTION WITH DIALOGIC® PRODUCTS. NO LICENSE,
EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY
INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS
DOCUMENT. EXCEPT AS PROVIDED IN A SIGNED AGREEMENT
BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO
LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS ANY
EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR
USE OF DIALOGIC PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR
PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY
INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY.
Dialogic products are not intended for use in medical, life saving, life
sustaining, critical control or safety systems, or in nuclear facility
applications.
Warranty and Return
Information

NOTE: Your system may include both CT Bus and
SCbus boards. To connect both board types, you must
install a CT Bus/SCbus Adapter on one of the CT Bus
boards in a system. See the CT Bus/SCbus Adapter
Quick Install Card for installation details about the
Adapter and the bus cables. Contact your Dialogic
Sales Representative to order an Adapter.
10. Install CT Bus Termination Jumpers only on boards
located at each end of the CT Bus cable. See Physical
Description section.
11. Replace the chassis cover plate when finished and
reconnect the power cords.
12. Turn the power to the chassis ON.
CAUTION: If your BIOS is set to use Plug and Play
technology and there are ISA boards in your system,
an IRQ conflict can be created if a DM3 board is
assigned the same IRQ as an ISA board. This could
cause the machine to stop responding. You can prevent
this by entering the BIOS and reserving the appropriate
IRQs (those used by your ISA boards) for ISA use
only.

Connecting External Cables
The board connects to two T-1/E-1 network trunks.
Connections between the digital network trunk and the
RJ-48C jacks on the board must be made using the HiZ
cable assemblies supplied with the board.


After Installing the
Hardware

After installing the Dialogic® hardware, proceed with the
software installation as described in the Dialogic® System
Software documentation (if applicable).
For technical specifications and product information go to:
http://www.dialogic.com/products.htm.


Warranty Period
For specific warranty information for this board, refer to
the Warranty section of the Products page, located at this
URL: http://www.dialogic.com/warranties/.

Contacting Technical Support
Dialogic provides technical support for its products
through a network of value added distributors who are
trained to answer technical questions on installing and
configuring Dialogic® products. If you are unsure how
to contact your support channel, please call Dialogic
in the United States at 973-967-6600 (9am-5pm EST)
and we will assist in obtaining the appropriate support
channel. Outside the United States please refer to
http://www.dialogic.com/support/contact to obtain
local contact information.

Dialogic also provides direct support via Dialogic® Pro™
Services agreements. For more details of direct support
from Dialogic please refer to:
http://www.dialogic.com/support/DialogicPro.

Returning a Product
To return a board for warranty repair or any other returns,
please refer to the following:
http://www.dialogic.com/support/hwfaults. To return a
board for warranty repair, please refer to the following:
http://www.dialogic.com/support/hwfaults. For all other
returns, contact your vendor or Dialogic Customer Support
(for more information, see
http://www.dialogic.com/support/contact/ ).

Sales Assistance
If you have a sales question, please contact your
local Sales Representative or the Regional Sales Office
for your area. Address, telephone and fax numbers, are
available at the Dialogic website located at:
http://www.dialogic.com/contact.htm.
To purchase Dialogic® products, please refer to the
following website to locate the appropriate supplier.
http://www.dialogic.com/purchase.htm.






Note:
Your CT Bus cable may
have a different number
of connectors (drops).
CT Bus
Cable
Installing the CT Bus Cable
Colored
Stripe
(Pin 1)

DM3 HiZ
DualSpan
Board
Trunk 2
Rx
Tx
Trunk 1
Rx
TxT-1/E-1
Cables
(Trunk 1)
Computer
Chassis
T-1/E-1
Cables
(Trunk 2)
HiZ Cable
Assemblies
(2 Required)
1
2
3
4
Connecting HiZ Cable Assemblies


Central
Office
Customer
Premises
Equipment
Notes:
DM3 HiZ DualSpan
Board
HiZ Port 1 receives from user trunk 1 receive pin.
HiZ Port 2 receives from user trunk 1 transmit pin.
HiZ Port 3 receives from user trunk 2 receive pin.
HiZ Port 4 receives from user trunk 2 transmit pin.
Transmit pin on HiZ ports is not used.
Trunk 1
Trunk 2
Rx
Rx
Tx
Tx
Rx Rx Rx Rx
Ports
1 2 3 4

Manual

No manual found...

FAQs

Is the DM/V480-2T1-PCI-HiZ readily available?

The DM/V480-2T1-PCI-HiZ is no longer being produced, so supply is limited. Here at GID, we are able locate and acquire difficult to find products. The time required to receive the part can vary, with an average of 5-7 business days.

What is the going rate for DM/V480-2T1-PCI-HiZ?

Pricing is based on several factors, such as availability and delivery requirements. GID Industrial offers highly competitive pricing and excellent customer service. Please contact us today to receive a quote for the DM/V480-2T1-PCI-HiZ.

Do you offer warranties and refunds?

All products offered by GID are backed by a 30-day warranty, including refunds and exchanges, with extended warranties available. Each product is guaranteed to be covered by GID throughout the life of its warranty.

I'm an international company. Can we still do business together?

Certainly! Our customer base is global. With few exceptions, we can ship anywhere in the world.

What payment methods are accepted for the DM/V480-2T1-PCI-HiZ?

Wire transfers, company checks, and major credit cards are the main payment options we offer at this time. On request, we also work with escrow companies.

What carriers does GID Industrial work with?

Typically, we use major carriers, including UPS, FedEx, USPS, and DHL. If our customer has a particular shipping requirement, we will work with other carriers to ship the product.

Does GID offer repair services?

GID Industrial does provide repair services for the DM/V480-2T1-PCI-HiZ. Our experienced team of engineers is available on hand to examine, diagnose, and repair the product efficiently and within a timely manner. Contact us today to discuss our repair service.

Can you assist in lifecycle management of the DM/V480-2T1-PCI-HiZ?

Absolutely! Managing lifecycles of industrial parts and equipment is a service we excel at. Our specialty is tracking the lifecycle of industrial products from production to obsolescence. We phase out obsolete parts and try to introduce next-generation products when possible.

Do you provide assistance in moving large quantities of obsolete inventory?

We often work with companies to assist with moving and migrating excess parts and inventory. Often, companies sell off end-of-life product for just its scrap value. Instead, we work to obtain top market value for companies looking to dispose of their excess industrial parts and equipment. GID Industrial has worked with not only the DM/V480-2T1-PCI-HiZ but also a wide variety of products.

Call for Price and Availability

+1-888-443-4456
local: +1-469-283-2440

or

Spinner